All Products

M6 x 30mm Set Screw HT10.9 Z/PGrade 10.9 bolts are made of alloy steel and have a higher strength than Grade 8.8 bolts.They have a minimum tensile strength of 1000 MPa and a minimum yield strength of 900 MPa.These bolts are specifically designed for applications that require high strength and re..

M8 Flat Round Washer GalvanisedThey are commonly used in various applications, primarily to distribute the load of a threaded fastener, such as a bolt or nut, over a larger surface area.This helps to prevent damage to the material being fastened and can also help to reduce the risk of loosening due ..

M8 Flat Round Washer ZPThey are commonly used in various applications, primarily to distribute the load of a threaded fastener, such as a bolt or nut, over a larger surface area.This helps to prevent damage to the material being fastened and can also help to reduce the risk of loosening due to vibra..

M8 Flat Washer SS304They are commonly used in various applications, primarily to distribute the load of a threaded fastener, such as a bolt or nut, over a larger surface area.This helps to prevent damage to the material being fastened and can also help to reduce the risk of loosening due to vibratio..

M8 Hex Nut SS304 (Each)Features and Benefits:A2 grade 18/8 stainless steel (Type 304 S15)Good resistance to corrosionDue to the hexagon nut having six sides it makes it easier to work with and is very versatileEasy to tighten and loosenAccessible from 360 degrees due to their shapeTypical Applicatio..

M8 HT8.8 Hex Nuts Zinc (EACH)These are suitable for low tensile strength applications as the medium carbon material has low tensile strength.But the medium carbon content makes the Class 8.8 Nuts to have high ductility and workability.There could be zinc plated, hot dip galvanized or plain..

M8 Spring Washer Zinc Plated (sold EACH)Zinc Spring Washers are thin spirals with a hole in the middle that is normally used as a nut-locking device.Product is electroplated with zinc which is then passivated with a transparent conversion layer.Z/P products are recommended for indoor and noncor..

M8 x 20mm Bolt HT8.8 Zinc PlatedGrade 8.8 Bolts belong to the DIN 933 grade 8.8 standard.This is a structural grade for bolts.This is a medium carbon steel bolt specification.These bolts are heat treated by quenched and tempered methods..

M8 x 25mm HT8.8 Set Screw ZPFull thread set screwsISO 4017 / AS 1111.2Steel class 8.8 high-tensileZinc plated..

M8 x 30mm HT8.8 Zinc BoltGrade 8.8 Bolts belong to the DIN 933 grade 8.8 standard.This is a structural grade for bolts.This is a medium carbon steel bolt specification.These bolts are heat treated by quenched and tempered methods..

M8 x 40mm HT8.8 Zinc BoltGrade 8.8 Bolts belong to the DIN 933 grade 8.8 standard.This is a structural grade for bolts.This is a medium carbon steel bolt specification.These bolts are heat treated by quenched and tempered methods..

M8 x 40mm SLEEVE ANCHOR EYEBOLT ZPEye Bolt Sleeve Anchors are a pre-assembled torque-controlled expansion through anchor with 8mm eyelet tie point.Designed to expand when cone is tightened locking the sleeve against the wall of the predrilled hole.Suitable for concrete, solid brick..

M8 x 50mm HT8.8 Zinc BoltGrade 8.8 Bolts belong to the DIN 933 grade 8.8 standard.This is a structural grade for bolts.This is a medium carbon steel bolt specification.These bolts are heat treated by quenched and tempered methods..

M8 x 80mm SS304 Set ScrewMaterial: 304 stainless steel bolts are suitable for use in wet or dry environments, are not easy to rust and have good corrosion resistance.Application: It is widely used in the assembly and maintenance of households, machine tools, construction, ships and DIY project, such..

MAGNETIC NUT SETTER 1/4X65MM 10pcs..