2-3 Days delivery
Order Only
Mechanical
| Body Material | Polycarbonate |
|---|---|
| Diffuser Material | PMMA |
| Fitting Colour | White |
| Installation Type | Recessed |
| IP Rating | IP20 |
Electrical
| Electrical Rating | Class II |
|---|---|
| Input Frequency | 50 Hz |
| Input voltage | 230Vac |
| In Australia the Input voltage is defined as 230Vac -6%/+10%. This effectively means that the voltage range of these products are 216Vac - 253Vac or 240V +6% | |
| Maximum Wattage | 3.7 W |
| Standby Power | 1.7 W |
| Standby power for non-maintained/switched maintained emergency devices is measured when the light is off and the charger is in standby mode. For maintained emergency devices, standby power is measured when the light is on and the charger is in standby mode. Typically, charging occurs for the first 16 hours after the device is powered or after a battery discharge. | |
| Working Temp Range | 0 to 40 °C |
Driver
| Dimmable | No |
|---|---|
| Driver Included | Yes |
| Integrated Driver | Yes |
| Driver Type | Wireless (IEC62386-104) with DT1 |
| Flex & Plug or Lead Length | 1200 mm |
| Wiring Type | Re-wireable Flex & Plug (2 pin) |
Emergency (EM suffix)
| Replacement Battery Code | 01302 |
|---|---|
| Emergency Classification | C0:C40, C90:C32 |
| Emergency Control | IEC62386-104 (Wireless DT1) |
| IEC62386-104 ~ Supports wireless test and monitoring over IEC62386-104 using IEC62386-202. | |
| Decal Size | 200 x 100 mm |
| Emergency Duration | 90 mins |
| Emergency Light Source Life | 18Y/00M |
| AS2293.3-2018 Projection of Light source life for LED Exit signs (appendix E) Defines the projected time until the surface luminance falls below the minimum required surface luminance for an exit sign. | |
| Emergency Mode | Maintained |
| Viewing Distance | 16 m |
Compliance
| Product Design Life | 12 years |
|---|---|
| The product design life relates to the total product life which includes LEDs, drivers and the enclosure. This is different to the LED lifetime which only refers to the economical lifetime of the LEDs at which time the lumen output has dropped below the L Value. The product design life is calculated at the maximum ambient or working temperature of the product and takes into account the Daily Use. | |
| Standards |
|
Warranty
| Commercial Use Warranty | 8 RTB (Total 8 Years) |
|---|
Ev-ress Blade-24m LED Ress Blade Exit. Maintained. All Running Man Deca
Ev-ress Blade-24m LED Ress Blade Exit. Maintained. All Running Man Deca
Razor Professional Recessed Emergency Exit, 16 & 24m
- Single and double-sided decals
- Soft-start charger to reduce building load
- Available in low illumination area black model
- Fast emergency switch-over (<0.5s) for high-task areas
- Chain and rod mounting with Surface and Rod Mount Kit
- Long life electronics
- 12 years design life at max. ambient
- High Quality Lithium battery (LiFePO4) and smart charger
- Self test (AS2293/IEC62034)
- Fully compliant (AS/NZS 2293)
Selected Models
- DALI (IEC 62386-202) DT1
- Ektor wired monitored system
- Wireless meshing system
- IEC 62386 over IEC 62386-104
- Wireless monitoring via Ektor Lynk
| Stock | |
| Stock | Low |
$215.600
Ex GST: $196.000
- Stock: Order Only
- SKU: EVO02686
- MPN: 02686